1～10 item / All 10 items
Turbidity meter
The completely waterproof IP67 compatible handheld digital turbidity meter MI1N-100M is easy to operate and, despite its compact size, offers high precision comparable to laboratory turbidity meters. It can measure in a range of 0 to 1000 NTU with a 3-range switch. The MI1N-100M uses polystyrene latex as the calibration standard solution, so NTU = polystyrene turbidity.
High Sensitivity Laser Turbidimeter / Model Number M8MT-110A / M8MT-400
- Ultra-high sensitivity Adopts a laser scattering light method, measuring from 0.0001 to 2 degrees with a resolution of 0.0001 degrees. - Easy operation Simply flow the sample liquid into the cell online for easy measurement. - Excellent expandability Multiple sensors, such as turbidity sensors, can be connected. - Simple maintenance Allows for long-term continuous use without calibration.
It is a high-precision, high-resolution turbidity meter.
The MI1L561-MK complies with EN ISO 7027. It has a built-in clock function that can store up to 1000 measurement data along with the measurement date and time, and it is capable of transferring data to a computer via an RS232 port.
The turbidity meter MI1B-322IR-MK is an easy-to-use turbidity meter with automatic zero correction.
The turbidity meter MI1B-322IR-MK is an easy-to-use turbidity meter with automatic zero correction. It can measure in a range of 0.01 to 1,100 NTU with a 3-range switch. Polystyrene latex is used as the calibration standard solution, so NTU equals polystyrene turbidity. It employs an infrared light source and uses a 90° transmitted scattered light method, allowing measurements to be taken in about 8 seconds. The main unit and turbidity standard solution will be delivered in a hard case.
Realizing simple turbidity measurement in the field with immersion-type sensors.
■Features ●Improved reliability in low concentration range The repeatability in the low measurement range has significantly improved to ±0.5 NTU compared to our conventional products. ●Power-saving design It can continuously measure for approximately 120 hours using two AA alkaline batteries. ●Easy monitoring with immersion measurement The sensor can be directly immersed in the sample water for measurement. It can be used for turbidity monitoring over a short period (within 24 hours). *This sensor does not have a cleaning function. Continuous measurement may be limited depending on water quality and usage conditions. *Continuous measurement at depths of 10 meters or more is not recommended. ●Memory function for 1000 data points Automatic memory at regular intervals is also possible. *Short interval memory function: 1 second to 99 minutes 59 seconds or Long interval memory function: 2 minutes to 99 hours 59 minutes (In the long interval memory function, the power will be OFF (sleep mode) after one minute of measurement until the next measurement.) ●Excellent expandability (Connectable to computers, external printers, recorders, etc.) We provide dedicated data collection software to import measurement data into a computer in text format.
The turbidity meter MI1AB-10RS is a high-precision and high-resolution turbidity meter.
We use a transmission scattering comparison method with an infrared light source.
It demonstrates its accuracy and reliability in measuring low turbidity (below 0.05 NTU).
It employs a state-of-the-art optical system and a tungsten light source based on the planning of the EPA (U.S. Environmental Protection Agency), demonstrating its accuracy and reliability, particularly in measuring low concentrations of turbidity (below 0.05 NTU). Additionally, it allows for the recording of various measurements on-site using a tag identification device and verification of calibration status through GLP functions.
The turbidity meter MI1P-526M is an easy-to-operate turbidity meter that supports measurements in the range of 0.01 to 1,000 FNU, thanks to its automatic calibration solution recognition correction.
The turbidity meter MI1P-526M is an easy-to-use device that supports measurements in the range of 0.01 to 1,000 FNU, thanks to its automatic calibration solution recognition correction. It uses a high-emission infrared LED as the light source and performs accurate measurements in about 8 seconds using a 90° transmitted scattered light method.
The turbidity meter MI1AB-20RS is a high-precision and high-resolution turbidity meter.
A tungsten lamp is used as the light source.
● 7-inch colorful touch screen ● The tungsten lamp light source meets USEPA 180.1 requirements.
● 7-inch colorful touch screen ● Tungsten lamp light source meets USEPA 180.1 requirements. ● 1-8 point calibration with formaldehyde standard solution or zero point water. ● Automatic adjustment from 0 to 4000 NTU. ● Data storage capacity of 1000 sets (GLP compliant). ● Stored data can be transferred via USB or RS-232 communication interface. ● The reset function automatically restores all settings to factory defaults.
